Botanica Notes

Baby Tears Soleirolia soleirolii

How to Propagate Baby Tears Plant in Water and Soil

How to Propagate Baby Tears Plant in Water and Soil

Quick answer: The most reliable way to propagate baby tears plant is using nodal stem cuttings placed in water or moist soil in bright, indirect light. Water propagation is the easiest route for most growers; soil division also works well if you have an established plant to split.

Baby Tears at a glance

Botanical name Soleirolia soleirolii
Light Bright indirect light; tolerates partial shade. Avoid direct sun to prevent leaf scorch.
Watering Keep soil consistently moist but not soggy. Water every 5-7 days; check if top 2-4 inches of soil is dry before watering
Humidity Humidity above 50%; aim for about 60%. Daily misting with distilled water or plant humidifier recommended.
Temperature Average room temperatures 60-75°F (16-24°C). Avoid temperatures above 78°F or below 50°F and fluctuations greater than 1
Soil Well-draining, loamy soil with peat moss. Slightly acidic, pH 5-6. Add perlite for drainage. Use pots with drainage hole
Feeding Balanced liquid fertilizer every 4-6 weeks during growing season (spring and summer).
Size 1-2 inches tall (sometimes to 5 inches); spreads 3-6 feet wide by fragile stems that root as they grow.
Difficulty demanding

Water propagation method

Water propagation is beginner-friendly because you can watch roots develop and move cuttings to soil at exactly the right moment.

  1. Take stem cuttings from healthy growth, making sure each includes at least one node (the bump where leaves emerge).
  2. Place the cutting in a glass or jar of room-temperature water, keeping the node submerged.
  3. Set it in bright, indirect light.
  4. Change the water every 4–5 days.
  5. Wait until roots reach around 3–5 cm long—brittle, over-grown roots are harder to transition.
  6. Plant the rooted cutting in well-draining, loamy soil mixed with peat moss.
  7. Keep soil consistently moist but not soggy and maintain it in a warm, bright location.
  8. Within a few weeks, new growth should appear.

Soil propagation and division

If your baby tears is already established and spreading, division is actually faster. Carefully separate the root ball in half, then pot each section in a well-draining soil mix. Sections at least 2 inches (5 cm) in diameter have the best chance because they contain enough stored energy in roots and stems.

For cuttings going straight into soil, dip them in rooting hormone for best results. Water the pot well and cover it with a plastic bag or lid to trap humidity around the cutting. After 3–4 weeks, stems should be well-rooted.

Keep the soil moist but never soggy during the rooting phase—this plant is sensitive to overwatering. Place the pot in bright, indirect light; direct sun will scorch the delicate leaves.

What to expect and common mistakes

Roots or new shoots typically appear within 3–5 weeks depending on temperature and humidity. Baby tears thrive when humidity stays above 50%, so daily misting or a humidifier speeds rooting.

The biggest mistake is overwatering. Cuttings fail not from dryness but from rotting stems in soggy soil or water that isn’t changed regularly. Check soil moisture with your finger before watering—if the top 2–4 inches feel dry, water then. In water propagation, set a phone reminder to change water every 4–5 days.

Temperature matters too. Keep propagations between 60°F and 75°F (16–24°C); above 78°F, stems soften and growth stops. Avoid drafty spots or vents where temperature fluctuates sharply.

Read the full guide: Baby Tears Plant Care: The Complete Guide

More about Baby Tears

The same problem in other plants

This article is for general information. If a pet or child may have eaten a plant, contact your vet, an animal poison control center or a doctor right away.

Sources

Photo: abhi supreem / Pexels, Pexels