String of Turtles Peperomia prostrata
How to Propagate String of Turtles: Water, Soil, and Leaf Methods

Quick answer: String of Turtles propagates easily from stem cuttings in water or soil. Take 3–4 inch cuttings below a leaf node, remove the lower leaves, and place in filtered water or well-draining soil mix. Roots develop in 2–4 weeks in water or 3–4 weeks in soil.
| Botanical name | Peperomia prostrata |
|---|---|
| Light | Bright indirect light in growth; full light in winter; avoid direct summer sun |
| Watering | Water when top 1 inch of soil is dry; moderate summer, sparse winter |
| Humidity | Prefers humid air; adapts to lower household humidity |
| Temperature | 18–30°C (65–86°F); keep above 10°C (50°F) |
| Soil | 50% peat/coco coir + 50% perlite/sand/pumice; loose, airy, slightly acidic pH 6.0-6.5 |
| Feeding | Balanced liquid fertilizer monthly spring to summer; dilute to half or quarter strength |
| Size | 0.1–0.5 m height and width |
| Difficulty | easy |
Best methods for propagating String of Turtles
You have two reliable routes: water and soil. Water propagation is slower but lets you watch roots form, making it satisfying for beginners. Soil propagation is quicker and gets cuttings ready to grow faster. Leaf propagation is possible but far less reliable than using stems.
For any method, start with a healthy parent plant and choose stems with at least one node—the point where leaves emerge—since new roots only develop there.
Water propagation step-by-step
- Cut a healthy stem 3–4 inches long, making the cut just below a leaf node.
- Remove the lower leaves, leaving 2–3 at the top.
- Place the cutting in a jar of room-temperature filtered or distilled water, with the bare node fully submerged and leaves above the waterline.
- Set the jar on a bright windowsill away from direct summer sun.
- Change the water every 5–7 days. After week 2, add a drop of liquid kelp fertilizer at 1/10 strength to speed rooting.
- Watch for roots to reach about 1–2 inches long, which typically takes 2–4 weeks. String of Turtles roots slowly in water compared to most plants, so patience matters here.
- Once roots are 1–2 inches, transfer gently to soil to avoid damaging the delicate roots.
Why use filtered water? Tap water chemicals can hinder rooting, especially over several weeks.
Soil propagation step-by-step
- Prepare a pot with the right mix: 50% peat or coco coir and 50% perlite, sand, or pumice for loose, airy soil at pH 6.0–6.5.
- Take 4–6 inch cuttings with the lower leaves removed.
- Optionally dip the cut end in rooting hormone to improve success.
- Lay the cuttings on top of the soil, pressing them gently so the nodes make contact with the mix.
- Water lightly and place in bright, indirect light.
- Keep soil moist (not soggy) until roots form in 3–4 weeks.
- After that, switch to the regular watering routine: water when the top 1 inch of soil feels dry.
Fragile roots ahead: String of Turtles has unusually thin, delicate roots that snap easily during potting. Handle them with care when transferring.
Why soil cuttings often work better
Soil propagation typically succeeds faster and avoids the week-by-week water changes. The cutting stays in its final growing medium, so there’s no transplant shock. The well-draining soil mix also keeps stems from sitting in moisture too long, which can cause rot on this plant’s relatively fragile stems.
Common mistakes to avoid
Overwatering the cutting. The urge to keep the soil constantly moist kills more cuttings than anything else. String of Turtles stores water in its succulent-like leaves, so it prefers to dry out between waterings. Feel the soil before watering, or use the taco test: squeeze a leaf gently—if it’s firm, skip watering.
Using regular potting soil. Standard soil holds too much moisture and causes root rot. Your cutting needs that 50/50 peat-to-drainage ratio to thrive.
Letting water stagnate. If you’re propagating in water, stale water invites rot and mold. Change it every 5–7 days without fail.
Wetting the foliage. String of Turtles has dense leaves that trap moisture. When watering soil cuttings, use bottom watering (set the pot in a dish of water and let it soak up from below) to keep leaves dry.
FAQ
How long does String of Turtles propagation take?
Water propagation typically takes 2–4 weeks to develop roots ready for soil, though this plant is slower in water than most. Soil propagation takes 3–4 weeks.
Can you propagate String of Turtles from leaves?
Leaves alone are unreliable for this plant. You need a stem cutting with at least one node, since that’s where new roots develop.
What temperature should propagation happen at?
String of Turtles thrives at 18–30°C (65–86°F). Keep cuttings always above 10°C (50°F), as cold exposure causes rapid tissue collapse.
Read the full guide: String of Turtles Care: The Complete Growing Guide
More about String of Turtles
The same problem in other plants
- How to Propagate Elephant Bush: A Step-by-Step Guide
- How to Propagate Pink Princess Philodendron: Step-by-Step Methods
- How to Propagate Fishbone Cactus: Step-by-Step Methods
- How to Propagate Bamboo Palm: Seeds and Cuttings
Sources
- String of Turtles (Peperomia prostrata) Plant Care: What to Know – Healthy Houseplants
- String of Turtles (Peperomia prostrata): Complete Care Guide 🌟 – Healthy Houseplants
- String of Turtles Propagation: Methods
Photo: Joaquin Reyes Ramos / Pexels, Pexels